Home > Lavry Engineering >

  Lavry Engineering chassis
chassis


 
Get instant price quote

Call LittleFishAudio.com toll free (877) 442-8346

(305) 283 4593 international
or
Email us! (click for jake@littlefishaudio.com)

Seen it for less? We can beat any price!




Street Price:

  Lavry Engineering chassis
  Sometimes
  0.05


Availability:: Usually Ships in 3 to 5 Business Days
Product Code: CHASSIS
Qty:

 

 

   LavryBlue Chassis Only
LavryBlue-MicPre Condenser, Dynamic, and RibbonSettings all on one  module. Module for easy installation into LavryBlue Chassis Digital Precision Gain Setting + Stored Memory 21-70dB Gain in 1dB Steps

Designed for clean, transparent high end performance at $968 USD, the stereo modules fit in a LavryBlue chassis which can accommodate 2 or 4 channels of mic pre’s. The typical 2X2 configuration (2A2D) can be expanded to include 2MicPre. If you already own a LavryBlue chassis this module takes 2 spaces. Plug and Play with the installation kit.

The MicPre provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings.

The unit is designed to yield a superior dynamic range even for high source resistance microphones.
The transformer free input provides pure and transparent bass, yet it features state of the art in
common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra- low noise double shunt regulated for minimum noise and channel separation.

Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology). Included is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain.


Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.

Each stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Lavry Engineering
Converters


Lavry Engineering 4496-9 4ch DA
Lavry Engineering 4496-17 2ch AD & 6ch DA
Lavry Engineering 4496-11 8ch 4DA's Configuration
Lavry Engineering 2 ch AD module
Lavry Engineering 2 Ch DA module
KRK VXT8 Two-way 8" Active Powered Monitor