The LS-ADAT provides 16 channels of ADAT LightPipe I/O to the AES16,
LynxTWO and Lynx L22 PCI cards and the AES16e PCI Express card.
Mounted next to the primary card, the LS-ADAT is controlled from the Lynx
Mixing Application that is already present. This powerful mixer allows the 16
ADAT inputs to be routed to any output and any of the AES16, LynxTWO or
L22s analog or digital input signals to be routed to the LS-ADAT’s 16 Lightpipe
channels. LS-ADAT installs in an empty bracket internally in your computer, no
PCI slot is required.
With four Lightpipe ports on the front (two for input and two for output), 16 input and
16 output channels are available at sample rates up to 48 kHz. Eight channels at
96 kHz and four channels at 192 kHz are available using S/MUX technology.
The ADAT Sync In port provides two methods of sample accurate synchronization,
ASIO and LS-ADAT’s built-in cue point capability. LS-ADAT offers a wide variety
of sample clock options. Its sample clock can be derived from a word clock or composite
video received by the LynxTWO. Also either Lightpipe input or the Sync port can be
selected as the clock source. When the AES16 is selected as clock source, the
LS-ADAT benefits from the extremely low jitter of the AES16’s SynchroLock word clock.
* Full Function ADAT interface
* Daughter card for LynxTWO, Lynx L22, all AES16 and AES16e models
* 16 I/O channels at sample rates up to 48 kHz
* 8 I/O channels at 96 kHz using S/MUX technology
* 4 I/O channels at 192 kHz
* Wide variety of sample rate sync options
* Two inputs and two outputs compatible with Alesis ADAT Type I and Type
II Optical Digital Interface Protocol
* Sample accurate synchronization
* Integrates with host card’s digital mixer
* RoHS Compliant
SpecificationsLynx LS-ADAT Specifications
|
ADAT
Optical I/O
|
|
Number
/ Type
|
Two inputs and two
outputs, compatible with Alesis ADAT Type I and Type II Optical Digital
Interface Protocol, up to 24-bit data
|
|
Channels
|
16 @ 44.1kHz 48 kHz
sample rates
8 @ 88.2 kHz and 96 kHz sample rates, S/MUX enabled
4 @ 176.4 kHz and 192 kHz sample rates, SMUX enabled
|
|
Input
Receiver
|
Fast-locking
phase-locked loop with 30 kHz to 55 kHz lock range
|
|
ADAT
Synchronization I/O
|
|
Number
/ Type
|
One 9-pin Sync In
port compatible with Alesis Synchronization Protocol
|
|
Signals
|
Time code (sample
count), word clock, and MIDI control data
|
|
Sample
Accurate Methods
|
ASIO Positioning
Protocol and hardware-based SMPTE frame address matching logic (Cue
Point).
|
|
MTC
|
Time code to MTC
conversion
|
|
MIDI
|
MIDI port transfers
serial input control data
|
|
Clock
Synchronization
|
|
Clock
Sources
|
Host card (LynxTWO/L22/AES16), Optical In 1, Optical In 2, ADAT Sync In
|
|
Modes
|
Master mode: utilizes
LynxTWO/L22/AES16 low-jitter sample clock to drive external ADAT devices
Slave mode: word clock derived from external ADAT device
|
|
Architecture
|
|
Core
|
FPGA-based core.
Support for field upgrades of firmware.
|
|
Audio
Devices
|
Host Card is visible
to applications as eight stereo record devices corresponding to ADAT
optical inputs 1 – 16 and eight stereo play devices corresponding to
ADAT optical outputs 1 – 16.
|
|
Routing/Mixing
|
Integrates with host
card’s digital mixer to allow independent routing of ADAT I/O with host
card analog and digital I/O.
|
|
Connections
|
|
I/O
Ports
|
(4) Bracket-mounted
TOSLINK connectors. (1) 9-pin female D-sub connector.
|
|
Other
|
LStream interface
headers
|
|
General
|
|
Host
Interface
|
Lynx proprietary
LStream™ Interface: 24.5 Mbps
bi-directional
|
|
Requirements
|
One available bracket
position (PCI slot not required), Host card: LynxTWO/L22/AES16
|
|
Size
|
3.0” H X 5.0” W X
0.75” D
|
|
EMI
Certifications
|
FCC and CE
|
|
Shipping
Weight
|
2 pounds
|
