* Maximum Output Level: +26dBu @ 1kHz
* Noise: -90dB @ 20Hz to 20kHz.
* Output connections: XLR and TSR 1/4" Jack on rear
* Phoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage.
* Microphone/Line input: XLR on Rear Panel
* DI inputs: ¼” TSR Jack on Front Panel
* Individual Earth Lift: Push-button Switches
* Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
* Gain reduction: -30dB push-button Mic/Line switch (Mic input)
* High Input Impedance DI: Mono 1/4" Jack on front panel (no FETs)
* Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6” on a PPM Meter).
* Phantom Power: Switchable phantom on Push-button Switch
* High Pass Filter: Roll-off starts at 120Hz @ 12dB per Octave.
* Phase Reverse: on Push-button Switch
* Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
* Frequency Response: DI Input Stage: -0.3dB @ 40Hz, - 0.5dB @ 25kHz
* Typical Headroom: +24dB on Mic-Pre stage
* Gyratory-based EQ Frequency Centres: (4 Bands) High - 15K, 10K, Hi Mid - 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low - 130Hz, 80Hz, 40Hz
* EQ Cut/Boost Levels: 16dB Cut/Boost Per Band
* DI Stage gain: Maximum of 20dB
