Home > SPL-Hardware >

  SPL 2930 Cabulator NEW 2009
2930 Cabulator NEW 2009


 
Alternative Views:
Want a better price?

Call LittleFishAudio.com
toll free: (877) 442-8346
international: (305) 283 4593
or Email us!



Street Price:

  SPL 2930 Cabulator NEW 2009
  Never
  0.05


Availability:: Usually Ships in 3 to 5 Business Days
Product Code: 2930
Qty:

 
Cabulator NEW 2009

The Cabulator combines three main features for e-guitar amplifiers: power soak, speaker simulation, and D.I. output.

Thanks to the variable power soak you can play any amp loud without being loud – with headphones even inaudible if necessary.

The Cabulator’s fully analog design excludes latencies. It thereby gives the guitarist a direct response with an authentic punch. Even the most subtle guitar amp nuances are reproduced as precisely as harmonics structures and dynamic response of a cabinet.

You always get a top signal in recording quality in seconds – both for direct recording and for a live mix.

Advantages
You can operate the Cabulator intuitively right from the start and need no further know-how. The sound tuning is well balanced so that there are no bad or wrong settings at all, but a broad range of great sounds instead.
  • With the Cabulator a guitar amp can always be played loud without necessarily being loud.
  • Fully analog construction for authentic sonic quality and direct, latency-free playability.
  • Variable power soak without dynamic loss or damped highs.
  • Passive power soak: the power soak functionality and regulation is passive and can also be used without power connection.
  • The transformer-based design maintains the harmonic content of a tube amp.
  • Sound processing is independent from absolute volume levels, which means that no recording room is necessary and ear-saving work is possible everywhere and at any time.
  • Sonically much more flexible than a fixed cabinet/mike set in that different sound characteristics can be simulated.
  • Multiple guitar tracks can be “stacked” – the doubled layers become “phatter”. In the process, there will not be any thinning effect from phase shifts as with digital simulation.
  • 100 Watts power soak: the power amp‘s distortion may, as with cabinets, be integrated into an authentically distorted sonic design.
  • Resulting recorded sounds are independent from room characteristics.
  • Signals for live mixes are at recording quality level and free from crosstalk from other sound sources.
  • The guitarist can play in the control room to listen and react to the playback directly.
  • Significantly less time spent and much more efficiency and convenience in equipment setup, preparation, and working with sound variations.
  • Working procedures and connections follow customary standards of amp and cabinet sets.
  • The D. I. OUTPUT is transformer-balanced and provides for galvanic insulation.
  • Connections from the D. I. OUTPUT can be both balanced or unbalanced.
Specs
Input
Speaker In: 1/4" TRS jack
Impedance: 8 Ohm
Max. input load: 100 W RMS, 200 W peak

Outputs
Soak output: 1/4" TRS jack
D.I. output: 1/4" TRS jack, transformer balanced
Impedance: unbalanced ca. 40 Ohm, balanced ca. 80 Ohm
Max. output level: +4 dBu
Signal to noise ratio: -85 dBu (unweighted)

Power Supply
Power connection: external power supply for voltages from 100-250 volts, 9 V DC, 200 mA, 2,1 mm DC plug
Power consumption: 0,5 VA
Fuse (internal): 100 – 250 V AC, 100 mA slow blow

Dimensions & Weight
Height x width x depth: 134 x 300 x 207 mm   
Weight: 3 kg/6,61 lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SPL-Hardware
Monitoring Solutions


SPL 2910 Auditor NEW 2009
SPL 2800 Frontliner NEW Channel Strip
SPL 2730 Phonitor
SPL 2600 Atmos 2 including 25m Multicore
SPL 2595 PQ - Passeq Equalizer
SPL 2591 MixDream XP
SPL 2489 SMC - Surround Monitor Controller
SPL 2485 Gold Mike Mark 2
SPL 2384 MixDream