Tube-Tech CL 1B NATIVE (VST/AU/RTAS)

The world famous Lydkraft/Tube-Tech CL 1B opto compressor as a native plug-in! Says Tube-Tech designer/president John Petersen: "a truly faithful and very exact replica of the hardware CL 1B."




Tube-Tech CL 1B is a true studio classic, heard on tons and tons of records for the past 20 years. Like its hardware counterpart, the Tube-Tech CL 1B native plug-in sounds soft, smooth, groovy and can compress an insane amount of dB's without sounding bad.

The CL 1B plug-ins by Softube are the only Tube-Tech plug-ins that are fully endorsed by Tube-Tech.

This version requires no DSP hardware but uses the same outstanding modeling technology and algorithms as the famous Tube-Tech CL 1B plug-in for TDM and PowerCore (distributed by TC Electronic). The sound is of course just as fantastic as its predecessor. With this unprecedented accuracy, down to details such as the precise VU meter behaviour, the Tube-Tech CL 1B plug-in is definitely in a league of its own.
In Short

    * Classic Tube-Tech sound in your computer
    * Created together with the designers at Lydkraft/Tube-Tech
    * Each and every component carefully modeled
    * Fix./man. mode for breaking traditional compression boundaries
    * External sidechain control
    * A seriously great looking GUI!
    * Very CPU friendly

Controls



Compression controls

    * Gain: Up to +30 dB of make-up gain
    * Ratio: Continuous ratio control from 2:1 to 10:1
    * Threshold: Continuous threshold control from +20 dB to -40 dB
    * Attack: From 0.5 to 300 milliseconds
    * Release: From 0.05 to 10 seconds

Attack/release select

The Tube-Tech CL 1B features a unique attack/release switch. The switch has three different positions:

    * Fixed: In the fixed mode, the attack time is set to 1 millisecond and the release is set to 50 milliseconds
    * Manual: In the manual mode, the attack and release controls work as normal
    * Fix./man: In the fix./man. mode, the release control works as in manual mode. The attack, however, is fixed to a fast attack and the attack knob turns into a delay for the release time.



Sidechain bus select

Setting the Sidechain bus select to 'external' lets you - you guessed it! - use an external sidechain.

Meter options

At your disposal is an old school VU meter capable of showing three different things.

    * Input: The VU meter shows the input level
    * Compression: The VU meter shows the amount of gain reduction
    * Output: The VU meter shows the output level



Platforms

    * Native version: includes VST/AU/RTAS formats

Native version

    * Mac OS X (10.4 or higher), Windows XP or higher
    * Mac: Intel or PowerPC processor (G3 or higher), Windows: PIII or higher
    * 512 MB RAM
    * Any VST, AudioUnits or RTAS compatible host application
    * iLok USB key and the latest Pace Interlok drivers